By setting your boiler’s flow temperature to 55 – 60°C (140°F) you can save as much as 80 dollars each year.
The boiler flow setting is the temperature setting at which the water will leave your boiler. You will find that the default temperature is typically too high. With this slight reduction in the heat setting, you will still enjoy a warm home and diminish the energy bills you have by as much as 8%. Based on the average prices to heat a regular-sized home, this can save you as much as £80 a year or even more.
If yours is a combi boiler or a tankless water heater, set the temperature at 50°C (122°F) for the heating and 55°C (131°F) for the hot water.
If you have a boiler coupled to a hot water cylinder, the best option is to set the boiler temperature setting a little above 60°C (140°F) for the heating and hot water at the boiler, the boiler tank’s setting should be at 60°C. You can find the controls for adjusting this setting halfway up the tank. Always have your boiler serviced, Corgihomeplan will ensure that your boiler is running efficiently.
Important Tip: Hot water should be stored at temperatures high enough to prevent the breeding of bacteria like legionella. Get more information on this important safety tip.
Air dry instead of using the dryer, and you could save: £70
Instead of loading your wet clothes in the dryer, take full advantage of sustainable wind and solar energy for drying clothes. The price is free and can save you as much as £70 a year. This sustainable plan is also important for enhancing the longevity of your appliances.
Mind the gaps, you could save £52
Draughts running through the house can place a great strain on your HVAC system and cause it to work harder to provide a proper home temperature. Protect your energy expenses by preserving your home’s thermal pocket as best you can. Check the gaps around doors, windows, and other gaps in the home to ensure that every calorie of heat is providing your home with warmth.
You can easily spend hundreds of dollars on professionals to do this work. But it takes the most simplistic of tools to do a good job. A thermal camera, a candle’s flame, or the back of your hand is perfect for detecting warm or cool air flowing in from the outside. Then apply some creativity to patch these drafty gaps.
Control your thermostat. You could save £139
Taking full advantage of your thermostat is another way to save energy. If you are using your thermostat as an on/off switch or modifying your temperature to be more comfortable, you will be wasting a lot of energy. The best way to use the thermostat is to set it and leave it. The best temperature range for your thermostat is between 64°- 69°F. By lowering the temperature ranges on your thermostat just a single degree you can save over £100 each year.
Use an insulating jacket for your hot water tank and save as much as £40
You can reduce the amount of heat escaping from your boiler tank by providing an extra layer of insulation to your hot water cylinder. A warm winter coat can do this job perfectly and save you as much as £40 each year. Exposed hot water pipes can also be insulated with foam tubing that will further preserve the heat factor of your heated water.
Get in a nighttime routine.
You will preserve the interior temperatures of your home if you develop a routine in the evenings. Pulling your curtains closed before dusk will contain the solar energy absorbed by the home throughout the day and prevent this from spilling into the night air.
Reduce your shower time and save £80
By keeping your shower time to a mere 4 minutes each day, the average home can save as much as £80.
No comments:
Post a Comment